Upload files to "/"

etc/calamares/branding/ezarcher/branding.desc

@@ -0,0 +1,222 @@
+# 4rch custom settings
+# SPDX-FileCopyrightText: no
+# SPDX-License-Identifier: CC0-1.0
+#
+# Product branding information. This influences some global
+# user-visible aspects of Calamares, such as the product
+# name, window behavior, and the slideshow during installation.
+#
+# Additional styling can be done using the stylesheet.qss
+# file, also in the branding directory.
+---
+componentName:  ezarcher
+
+
+### WELCOME / OVERALL WORDING
+#
+# These settings affect some overall phrasing and looks,
+# which are most visible in the welcome page.
+
+# This selects between different welcome texts. When false, uses
+# the traditional "Welcome to the %1 installer.", and when true,
+# uses "Welcome to the Calamares installer for %1." This allows
+# to distinguish this installer from other installers for the
+# same distribution.
+welcomeStyleCalamares:   false
+
+# Should the welcome image (productWelcome, below) be scaled
+# up beyond its natural size? If false, the image does not grow
+# with the window but remains the same size throughout (this
+# may have surprising effects on HiDPI monitors).
+welcomeExpandingLogo:   true
+
+### WINDOW CONFIGURATION
+#
+# The settings here affect the placement of the Calamares
+# window through hints to the window manager and initial
+# sizing of the Calamares window.
+
+# Size and expansion policy for Calamares.
+#  - "normal" or unset, expand as needed, use *windowSize*
+#  - "fullscreen", start as large as possible, ignore *windowSize*
+#  - "noexpand", don't expand automatically, use *windowSize*
+windowExpanding:    normal
+
+# Size of Calamares window, expressed as w,h. Both w and h
+# may be either pixels (suffix px) or font-units (suffix em).
+#   e.g.    "800px,600px"
+#           "60em,480px"
+# This setting is ignored if "fullscreen" is selected for
+# *windowExpanding*, above. If not set, use constants defined
+# in CalamaresUtilsGui, 800x520.
+windowSize: 800px,520px
+
+# Placement of Calamares window. Either "center" or "free".
+# Whether "center" actually works does depend on the window
+# manager in use (and only makes sense if you're not using
+# *windowExpanding* set to "fullscreen").
+windowPlacement: center
+
+### PANELS CONFIGURATION
+#
+# Calamares has a main content area, and two panels (navigation
+# and progress / sidebar). The panels can be controlled individually,
+# or switched off. If both panels are switched off, the layout of
+# the main content area loses its margins, on the assumption that
+# you're doing something special.
+
+# Kind of sidebar (panel on the left, showing progress).
+#  - "widget" or unset, use traditional sidebar (logo, items)
+#  - "none", hide it entirely
+#  - "qml", use calamares-sidebar.qml from branding folder
+# In addition, you **may** specify a side, separated by a comma,
+# from the kind. Valid sides are:
+#  - "left" (if not specified, uses this)
+#  - "right"
+#  - "top"
+#  - "bottom"
+# For instance, "widget,right" is valid; so is "qml", which defaults
+# to putting the sidebar on the left. Also valid is "qml,top".
+# While "widget,top" is valid, the widgets code is **not** flexible
+# and results will be terrible.
+sidebar: widget
+
+# Kind of navigation (button panel on the bottom).
+#  - "widget" or unset, use traditional navigation
+#  - "none", hide it entirely
+#  - "qml", use calamares-navigation.qml from branding folder
+# In addition, you **may** specify a side, separated by a comma,
+# from the kind. The same sides are valid as for *sidebar*,
+# except the default is *bottom*.
+navigation: widget
+
+
+### STRINGS, IMAGES AND COLORS
+#
+# This section contains the "branding proper" of names
+# and images, rather than global-look settings.
+
+# These are strings shown to the user in the user interface.
+# There is no provision for translating them -- since they
+# are names, the string is included as-is.
+#
+# The four Url strings are the Urls used by the buttons in
+# the welcome screen, and are not shown to the user. Clicking
+# on the "Support" button, for instance, opens the link supportUrl.
+# If a Url is empty, the corresponding button is not shown.
+#
+# bootloaderEntryName is how this installation / distro is named
+# in the boot loader (e.g. in the GRUB menu).
+#
+# These strings support substitution from /etc/os-release
+# if KDE Frameworks 5.58 are available at build-time. When
+# enabled, @{var-name} is replaced by the equivalent value
+# from os-release. All the supported var-names are in all-caps,
+# and are listed on the FreeDesktop.org site,
+#       https://www.freedesktop.org/software/systemd/man/os-release.html
+# Note that ANSI_COLOR and CPE_NAME don't make sense here, and
+# are not supported (the rest are). Remember to quote the string
+# if it contains substitutions, or you'll get YAML exceptions.
+#
+# The *Url* entries are used on the welcome page, and they
+# are visible as buttons there if the corresponding *show* keys
+# are set to "true" (they can also be overridden).
+strings:
+    productName:         "@{NAME}"
+    shortProductName:    4RCH
+    version:             2021
+    shortVersion:        2021
+    versionedName:       4RCH Linux
+    shortVersionedName:  4RCH Linux
+    bootloaderEntryName: 4RCH Linux
+    productUrl:          https://sourceforge.net/projects/ezarch/
+#   supportUrl:          https://sourceforge.net/projects/ezarch/
+#   knownIssuesUrl:      https://sourceforge.net/projects/ezarch/
+#   releaseNotesUrl:     https://sourceforge.net/projects/ezarch/
+#   donateUrl:           https://sourceforge.net/projects/ezarch/
+
+# These images are loaded from the branding module directory.
+#
+# productBanner is an optional image, which if present, will be shown
+#       on the welcome page of the application, above the welcome text.
+#       It is intended to have a width much greater than height.
+#       It is displayed at 64px height (also on HiDPI).
+#       Recommended size is 64px tall, and up to 460px wide.
+# productIcon is used as the window icon, and will (usually) be used
+#       by the window manager to represent the application. This image
+#       should be square, and may be displayed by the window manager
+#       as small as 16x16 (but possibly larger).
+# productLogo is used as the logo at the top of the left-hand column
+#       which shows the steps to be taken. The image should be square,
+#       and is displayed at 80x80 pixels (also on HiDPI).
+# productWallpaper is an optional image, which if present, will replace
+#       the normal solid background on every page of the application.
+#       It can be any size and proportion,
+#       and will be tiled to fit the entire window.
+#       For a non-tiled wallpaper, the size should be the same as
+#       the overall window, see *windowSize* above (800x520).
+# productWelcome is shown on the welcome page of the application in
+#       the middle of the window, below the welcome text. It can be
+#       any size and proportion, and will be scaled to fit inside
+#       the window. Use `welcomeExpandingLogo` to make it non-scaled.
+#       Recommended size is 320x150.
+#
+# These filenames can also use substitutions from os-release (see above).
+images:
+    # productBanner:       "banner.png"
+    productIcon:         "squid.png"
+    productLogo:         "logo.png"
+    productWallpaper:    "wallpaper.png"
+    productWelcome:      "languages.png"
+
+# Colors for text and background components.
+#
+#  - sidebarBackground is the background of the sidebar
+#  - sidebarText is the (foreground) text color
+#  - sidebarTextHighlight sets the background of the selected (current) step.
+#    Optional, and defaults to the application palette.
+#  - sidebarSelect is the text color of the selected step.
+#
+# These colors can **also** be set through the stylesheet, if the
+# branding component also ships a stylesheet.qss. Then they are
+# the corresponding CSS attributes of #sidebarApp.
+style:
+   sidebarBackground:    "#292F34"
+   sidebarText:          "#FFFFFF"
+   sidebarTextSelect:    "#292F34"
+   sidebarTextHighlight: "#D35400"
+
+### SLIDESHOW
+#
+# The slideshow is displayed during execution steps (e.g. when the
+# installer is actually writing to disk and doing other slow things).
+
+# The slideshow can be a QML file (recommended) which can display
+# arbitrary things -- text, images, animations, or even play a game --
+# during the execution step. The QML **is** abruptly stopped when the
+# execution step is done, though, so maybe a game isn't a great idea.
+#
+# The slideshow can also be a sequence of images (not recommended unless
+# you don't want QML at all in your Calamares). The images are displayed
+# at a rate of 1 every 2 seconds during the execution step.
+#
+# To configure a QML file, list a single filename:
+#   slideshow:               "show.qml"
+# To configure images, like the filenames (here, as an inline list):
+#   slideshow: [ "/etc/calamares/slideshow/0.png", "/etc/logo.png" ]
+slideshow:               "show.qml"
+
+# There are two available APIs for a QML slideshow:
+#  - 1 (the default) loads the entire slideshow when the installation-
+#      slideshow page is shown and starts the QML then. The QML
+#      is never stopped (after installation is done, times etc.
+#      continue to fire).
+#  - 2 loads the slideshow on startup and calls onActivate() and
+#      onLeave() in the root object. After the installation is done,
+#      the show is stopped (first by calling onLeave(), then destroying
+#      the QML components).
+#
+# An image slideshow does not need to have the API defined.
+slideshowAPI: 2
+
+

etc/calamares/branding/ezarcher/languages.png.license

@@ -0,0 +1,2 @@
+SPDX-FileCopyrightText: 2015 Teo Mrnjavac <teo@kde.org>
+SPDX-License-Identifier: GPL-3.0-or-later

etc/calamares/branding/ezarcher/show.qml

@@ -0,0 +1,121 @@
+/* === This file is part of Calamares - <http://github.com/calamares> ===
+ *
+ *   Copyright 2015, Teo Mrnjavac <teo@kde.org>
+ *
+ *   Calamares is free software: you can redistribute it and/or modify
+ *   it under the terms of the GNU General Public License as published by
+ *   the Free Software Foundation, either version 3 of the License, or
+ *   (at your option) any later version.
+ *
+ *   Calamares is distributed in the hope that it will be useful,
+ *   but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ *   GNU General Public License for more details.
+ *
+ *   You should have received a copy of the GNU General Public License
+ *   along with Calamares. If not, see <http://www.gnu.org/licenses/>.
+ * 
+ *   4RCH custom settings
+ */
+
+import QtQuick 2.0;
+import calamares.slideshow 1.0;
+
+Presentation
+{
+    id: presentation
+
+    Timer {
+        id: advanceTimer
+        interval: 30000
+        running: true
+        repeat: true
+        onTriggered: presentation.goToNextSlide()
+    }
+
+    Slide {
+        anchors.fill: parent
+        anchors.verticalCenterOffset: 0
+
+
+        Image {
+            id: background1
+            source: "slide1.png"
+            width: parent.width; height: parent.height          
+            horizontalAlignment: Image.AlignCenter
+    		verticalAlignment: Image.AlignTop
+
+            anchors.fill: parent
+
+            Text {
+                anchors.centerIn: parent
+                anchors.verticalCenterOffset: 165
+                anchors.horizontalCenterOffset: 0
+                font.pixelSize: parent.width *.020
+                color: 'white'
+                text: qsTr("<b>Welcome to 4RCH Linux, an Arch based Linux<br/>")
+                wrapMode: Text.WordWrap
+                width: parent.width / 1.4
+                horizontalAlignment: Text.AlignHCenter
+            }
+        }
+    }
+
+    Slide {
+        anchors.fill: parent
+        anchors.verticalCenterOffset: 0
+
+        Image {
+            id: background2
+            source: "slide1.png"
+            width: parent.width; height: parent.height          
+            horizontalAlignment: Image.AlignCenter
+    		verticalAlignment: Image.AlignTop
+
+            anchors.fill: parent
+
+            Text {
+                anchors.centerIn: parent
+                anchors.verticalCenterOffset: 163
+                anchors.horizontalCenterOffset: 0
+                font.pixelSize: parent.width *.020
+                color: 'white'
+                text: qsTr("<b>4RCH aims to be minimal but simple arch based distribution<br/>")
+                
+                wrapMode: Text.WordWrap
+                width: parent.width / 1.4
+                horizontalAlignment: Text.AlignHCenter
+            }
+        }
+    }
+
+    Slide {
+        anchors.fill: parent
+        anchors.verticalCenterOffset: 0
+
+        Image {
+            id: background4
+            source: "slide1.png"
+            width: parent.width; height: parent.height
+            horizontalAlignment: Image.AlignCenter
+    		verticalAlignment: Image.AlignTop
+    		
+            anchors.fill: parent
+
+            Text {
+                anchors.centerIn: parent
+                anchors.verticalCenterOffset: 165
+                anchors.horizontalCenterOffset: 0
+                font.pixelSize: parent.width *.020
+                color: 'white'
+                text: qsTr("")
+                wrapMode: Text.WordWrap
+                width: parent.width / 1.4
+                horizontalAlignment: Text.AlignHCenter
+            }
+        }
+    }
+
+    Component.onCompleted: advanceTimer.running = true
+}
+

etc/calamares/branding/ezarcher/squid.png.license

@@ -0,0 +1,2 @@
+SPDX-FileCopyrightText: 2014 Teo Mrnjavac <teo@kde.org>
+SPDX-License-Identifier: GPL-3.0-or-later

etc/calamares/branding/ezarcher/stylesheet.qss

@@ -0,0 +1,92 @@
+/*
+
+A branding component can ship a stylesheet (like this one)
+which is applied to parts of the Calamares user-interface.
+In principle, all parts can be styled through CSS.
+Missing parts should be filed as issues.
+
+The IDs are based on the object names in the C++ code.
+You can use the Debug Dialog to find out object names:
+  - Open the debug dialog
+  - Choose tab *Tools*
+  - Click *Widget Tree* button
+The list of object names is printed in the log.
+
+Documentation for styling Qt Widgets through a stylesheet
+can be found at
+    https://doc.qt.io/qt-5/stylesheet-examples.html
+    https://doc.qt.io/qt-5/stylesheet-reference.html
+In Calamares, styling widget classes is supported (e.g.
+using `QComboBox` as a selector).
+
+This example stylesheet has all the actual styling commented out.
+The examples are not exhaustive.
+
+*/
+
+/*** Generic Widgets.
+ *
+ * You can style **all** widgets of a given class by selecting
+ * the class name. Some widgets have specialized sub-selectors.
+ */
+
+/*
+QPushButton { background-color: green; }
+*/
+
+/*** Main application window.
+ *
+ * The main application window has the sidebar, which in turn
+ * contains a logo and a list of items -- note that the list
+ * can **not** be styled, since it has its own custom C++
+ * delegate code.
+ */
+
+/*
+#mainApp { }
+#sidebarApp { }
+#logoApp { }
+*/
+
+/*** Welcome module.
+ *
+ * There are plenty of parts, but the buttons are the most interesting
+ * ones (donate, release notes, ...). The little icon image can be
+ * styled through *qproperty-icon*, which is a little obscure.
+ * URLs can reference the QRC paths of the Calamares application
+ * or loaded via plugins or within the filesystem. There is no
+ * comprehensive list of available icons, though.
+ */
+
+/*
+QPushButton#aboutButton { qproperty-icon: url(:/data/images/release.svg); }
+#donateButton,
+#supportButton,
+#releaseNotesButton,
+#knownIssuesButton { qproperty-icon: url(:/data/images/help.svg); }
+*/
+
+/*** Partitioning module.
+ *
+ * Many moving parts, which you will need to experiment with.
+ */
+
+/*
+#bootInfoIcon { }
+#bootInfoLable { }
+#deviceInfoIcon { }
+#defineInfoLabel { }
+#scrollAreaWidgetContents { }
+#partitionBarView { }
+*/
+
+/*** Licensing module.
+ *
+ * The licensing module paints individual widgets for each of
+ * the licenses. The item can be collapsed or expanded.
+ */
+
+/*
+#licenseItem {  }
+#licenseItemFullText {  }
+*/

etc/calamares/modules/bootloader.conf

@@ -0,0 +1,22 @@
+# 4rch custom settings
+# SPDX-FileCopyrightText: no
+# SPDX-License-Identifier: CC0-1.0
+#
+# Configuration for the bootloader module.
+# 
+---
+
+efiBootLoader: "grub"
+
+kernel: "/vmlinuz-linux"
+img: "/initramfs-linux.img"
+fallback: "/initramfs-linux-fallback.img"
+timeout: "10"
+
+grubInstall: "grub-install"
+grubMkconfig: "grub-mkconfig"
+grubCfg: "/boot/grub/grub.cfg"
+grubProbe: "grub-probe"
+efiBootMgr: "efibootmgr"
+
+installEFIFallback: true

etc/calamares/modules/displaymanager.conf

@@ -0,0 +1,15 @@
+# 4rch custom settings
+# SPDX-FileCopyrightText: no
+# SPDX-License-Identifier: CC0-1.0
+#
+# Configuration for the displaymanager module.
+#
+---
+
+displaymanagers:
+  - sddm
+  - lightdm
+
+basicSetup: false
+
+sysconfigSetup: false

etc/calamares/modules/fstab.conf

@@ -0,0 +1,20 @@
+# 4rch custom settings
+# SPDX-FileCopyrightText: no
+# SPDX-License-Identifier: CC0-1.0
+#
+# Configuration for the fstab module.
+#
+---
+
+mountOptions:
+    default: defaults,noatime
+    btrfs: defaults,noatime,noautodefrag
+    btrfs_swap: defaults
+
+efiMountOptions: umask=0077
+
+ssdExtraMountOptions:
+    btrfs: ssd
+
+crypttabOptions: luks
+

etc/calamares/modules/grubcfg.conf

@@ -0,0 +1,20 @@
+# 4rch custom settings
+# SPDX-FileCopyrightText: no
+# SPDX-License-Identifier: CC0-1.0
+#
+# Configuration for the grugcfg module.
+#
+---
+
+overwrite: false
+
+prefer_grub_d: false
+
+keepDistributor: false
+
+defaults:
+    GRUB_TIMEOUT: 5
+    GRUB_DEFAULT: "saved"
+    GRUB_DISABLE_SUBMENU: true
+    GRUB_TERMINAL_OUTPUT: "console"
+    GRUB_DISABLE_RECOVERY: true

etc/calamares/modules/initcpio.conf

@@ -0,0 +1,11 @@
+# 4rch custom settings
+# SPDX-FileCopyrightText: no
+# SPDX-License-Identifier: CC0-1.0
+#
+# Configuration for the initcpio module.
+#
+---
+
+kernel: linux
+
+be_unsafe: false

etc/calamares/modules/keyboard.conf

@@ -0,0 +1,11 @@
+# 4rch custom settings
+# SPDX-FileCopyrightText: no
+# SPDX-License-Identifier: CC0-1.0
+#
+# Configuration for the keyboard module.
+#
+---
+
+xOrgConfFileName: "/etc/X11/xorg.conf.d/00-keyboard.conf"
+
+convertedKeymapPath: "/lib/kbd/keymaps/xkb"

etc/calamares/modules/locale.conf

@@ -0,0 +1,15 @@
+# 4rch custom settings
+# SPDX-FileCopyrightText: no
+# SPDX-License-Identifier: CC0-1.0
+#
+# Configuration for the locale module.
+#
+---
+
+region:                     ""
+zone:                       ""
+
+geoip:
+    style:    "json"
+    url:      "https://geoip.kde.org/v1/calamares"
+    selector: ""  # leave blank for the default

etc/calamares/modules/machineid.conf

@@ -0,0 +1,19 @@
+# 4rch custom settings
+# SPDX-FileCopyrightText: no
+# SPDX-License-Identifier: CC0-1.0
+#
+# Machine-ID and other random data on the target system.
+#
+---
+
+systemd: true
+
+dbus: true
+
+dbus-symlink: true
+
+entropy-copy: false
+
+entropy-files:
+    - /var/lib/urandom/random-seed
+    - /var/lib/systemd/random-seed

etc/calamares/modules/mount.conf

@@ -0,0 +1,39 @@
+# 4rch custom settings
+# SPDX-FileCopyrightText: no
+# SPDX-License-Identifier: CC0-1.0
+#
+# Configuration for the mount module.
+# 
+---
+
+extraMounts:
+    - device: proc
+      fs: proc
+      mountPoint: /proc
+    - device: sys
+      fs: sysfs
+      mountPoint: /sys
+    - device: /dev
+      mountPoint: /dev
+      options: bind
+    - device: tmpfs
+      fs: tmpfs
+      mountPoint: /run
+    - device: /run/udev
+      mountPoint: /run/udev
+      options: bind
+
+extraMountsEfi:
+    - device: efivarfs
+      fs: efivarfs
+      mountPoint: /sys/firmware/efi/efivars
+
+btrfsSubvolumes:
+    - mountPoint: /
+      subvolume: /@
+    - mountPoint: /home
+      subvolume: /@home
+    - mountPoint: /var/cache
+      subvolume: /@cache
+    - mountPoint: /var/log
+      subvolume: /@log

etc/calamares/modules/packages.conf

@@ -0,0 +1,18 @@
+# 4rch custom settings
+# SPDX-FileCopyrightText: no
+# SPDX-License-Identifier: CC0-1.0
+#
+# The configuration for the packages module.
+#
+---
+
+backend: pacman
+
+skip_if_no_internet: false
+update_db: false
+update_system: false
+
+operations:
+  - remove:
+    - calamares
+    - ckbcomp

etc/calamares/modules/partition.conf

@@ -0,0 +1,36 @@
+# 4rch custom settings
+# SPDX-FileCopyrightText: no
+# SPDX-License-Identifier: CC0-1.0
+#
+# Configuration for the partition module.
+#
+---
+
+efiSystemPartition:     "/boot/efi"
+
+efiSystemPartitionSize:     550M
+
+efiSystemPartitionName:     EFI
+
+userSwapChoices:
+    - none      # Create no swap, use no swap
+    - small     # Up to 4GB
+    - suspend   # At least main memory size
+    # - reuse     # Re-use existing swap, but don't create any (unsupported right now)
+    - file      # To swap file instead of partition
+
+swapPartitionName:      SWAP
+
+drawNestedPartitions:   false
+
+alwaysShowPartitionLabels: true
+
+allowManualPartitioning:   true
+
+initialPartitioningChoice: none
+
+initialSwapChoice: none
+
+defaultFileSystemType:  "btrfs"
+
+availableFileSystemTypes:  ["ext4","btrfs","xfs"]

etc/calamares/modules/removeuser.conf

@@ -0,0 +1,9 @@
+# 4rch custom settings
+# SPDX-FileCopyrightText: no
+# SPDX-License-Identifier: CC0-1.0
+#
+# Configuration for the removeuser module.
+#
+---
+
+username: 4rch

etc/calamares/modules/services-systemd.conf

@@ -0,0 +1,17 @@
+# 4rch custom settings
+# SPDX-FileCopyrightText: no
+# SPDX-License-Identifier: CC0-1.0
+#
+# Systemd services manipulation.
+#
+---
+
+services:
+   - name: "avahi-daemon"
+     mandatory: false
+
+timers:
+   - name: "fstrim"
+     mandatory: false
+   - name: "plocate-updatedb"
+     mandatory: false

etc/calamares/modules/shellprocess-ezfinish.conf

@@ -0,0 +1,18 @@
+# 4rch custom settings
+# SPDX-FileCopyrightText: no
+# SPDX-License-Identifier: CC0-1.0
+#
+# Configuration for the ezfinish.conf shell process job.
+#
+---
+
+i18n:
+    name: "Remove misc files"
+
+dontChroot: false
+timeout: 999
+script:
+    - "-mv @@ROOT@@/etc/systemd/system/ez-pacman-init @@ROOT@@/etc/systemd/system/pacman-init.service"
+    - "-rm @@ROOT@@/etc/systemd/system/etc-pacman.d-gnupg.mount"
+    - "-rm @@ROOT@@/root/.automated_script.sh"
+    - "-rm @@ROOT@@/root/.zlogin"

etc/calamares/modules/shellprocess-mvezmkinit.conf

@@ -0,0 +1,16 @@
+# 4rch custom settings
+# SPDX-FileCopyrightText: no
+# SPDX-License-Identifier: CC0-1.0
+#
+# Configuration for the mvezmkinit.conf files shell process job.
+#
+---
+
+i18n:
+    name: "Fix mkinitcpio stuff"
+
+dontChroot: false
+timeout: 999
+script:
+    - "-mv @@ROOT@@/etc/mkinitcpio.d/ezmkinit @@ROOT@@/etc/mkinitcpio.d/linux.preset"
+    - "-mv @@ROOT@@/etc/ezmkinitcpio.conf @@ROOT@@/etc/mkinitcpio.conf"

etc/calamares/modules/unpackfs.conf

@@ -0,0 +1,15 @@
+# 4rch custom settings
+# SPDX-FileCopyrightText: no
+# SPDX-License-Identifier: CC0-1.0
+#
+# Configuration for the unpackfs module.
+#
+---
+
+unpack:
+    -   source: "/run/archiso/bootmnt/arch/x86_64/airootfs.sfs"
+        sourcefs: "squashfs"
+        destination: "/"
+    -   source: "/run/archiso/bootmnt/arch/boot/x86_64/vmlinuz-linux"
+        sourcefs: "file"
+        destination: "/boot/vmlinuz-linux"

etc/calamares/modules/users.conf

@@ -0,0 +1,57 @@
+# 4rch custom settings
+# SPDX-FileCopyrightText: no
+# SPDX-License-Identifier: CC0-1.0
+#
+# Configuration for the users module.
+#
+---
+
+defaultGroups:
+    - name: users
+      must_exist: true
+      system: true
+    - adm
+    - lp
+    - power
+    - video
+    - network
+    - storage
+    - name: wheel
+      must_exist: false
+      system: true
+    - audio
+    - sys
+    - optical
+    - scanner
+    - rfkill
+    - uucp
+    - sambashare
+
+
+autologinGroup:  autologin
+
+doAutologin:     false
+
+sudoersGroup:    wheel
+
+setRootPassword: true
+
+doReusePassword: true
+
+passwordRequirements:
+    nonempty: true
+    minLength: -1  # Password at least this many characters
+    maxLength: -1  # Password at most this many characters
+    libpwquality:
+        - minlen=0
+        - minclass=0
+
+allowWeakPasswords: true
+
+allowWeakPasswordsDefault: true
+
+userShell: /bin/bash
+
+setHostname: EtcFile
+
+writeHostsFile: true

etc/calamares/modules/welcome.conf

@@ -0,0 +1,37 @@
+# 4rch custom settings
+# SPDX-FileCopyrightText: no
+# SPDX-License-Identifier: CC0-1.0
+#
+# Configuration for the welcome module.
+#
+---
+
+showSupportUrl:         false
+showKnownIssuesUrl:     false
+showReleaseNotesUrl:    false
+showDonateUrl:          false
+
+requirements:
+    requiredStorage:    8.0
+
+    requiredRam:        1.0
+
+    internetCheckUrl:   http://www.freebsd.org
+
+    check:
+        - storage
+        - ram
+        - power
+        - internet
+        - root
+        - screen
+
+    required:
+        # - storage
+        - ram
+        # - root
+
+geoip:
+    style:    "xml"
+    url:      "https://geoip.kde.org/v1/ubiquity"  # extended XML format
+    selector: "CountryCode"  # blank uses default, which is wrong

etc/calamares/qml/calamares/slideshow/BackButton.qml

@@ -0,0 +1,15 @@
+/* === This file is part of Calamares - <https://calamares.io> ===
+ *
+ *   SPDX-FileCopyrightText: 2018 Adriaan de Groot <groot@kde.org>
+ *   SPDX-License-Identifier: GPL-3.0-or-later
+ *
+ *   Calamares is Free Software: see the License-Identifier above.
+ *
+ */
+
+NavButton {
+    id: backButton
+    anchors.left: parent.left
+    visible: parent.currentSlide > 0
+    isForward: false
+}

etc/calamares/qml/calamares/slideshow/ForwardButton.qml

@@ -0,0 +1,14 @@
+/* === This file is part of Calamares - <https://calamares.io> ===
+ *
+ *   SPDX-FileCopyrightText: 2018 Adriaan de Groot <groot@kde.org>
+ *   SPDX-License-Identifier: GPL-3.0-or-later
+ *
+ *   Calamares is Free Software: see the License-Identifier above.
+ *
+ */
+
+NavButton {
+    id: forwardButton
+    anchors.right: parent.right
+    visible: parent.currentSlide + 1 < parent.slides.length;
+}

etc/calamares/qml/calamares/slideshow/NavButton.qml

@@ -0,0 +1,59 @@
+/* === This file is part of Calamares - <https://calamares.io> ===
+ *
+ *   SPDX-FileCopyrightText: 2018 Adriaan de Groot <groot@kde.org>
+ *   SPDX-License-Identifier: GPL-3.0-or-later
+ *
+ *   Calamares is Free Software: see the License-Identifier above.
+ *
+ */
+
+/* This is a navigation (arrow) button that fades in on hover, and
+ * which calls forward / backward navigation on the presentation it
+ * is in. It should be a child item of the presentation (not of a
+ * single slide). Use the ForwardButton or BackButton for a pre-
+ * configured instance that interacts with the presentation.
+ */
+
+import QtQuick 2.5;
+
+Image {
+    id: fade
+
+    property bool isForward : true
+
+    width: 100
+    height: 100
+    anchors.verticalCenter: parent.verticalCenter
+    opacity: 0.3
+
+    OpacityAnimator {
+        id: fadeIn
+        target: fade
+        from: fade.opacity
+        to: 1.0
+        duration: 500
+        running: false
+    }
+
+    OpacityAnimator {
+        id: fadeOut
+        target: fade
+        from: fade.opacity
+        to: 0.3
+        duration: 250
+        running: false
+    }
+
+    MouseArea {
+        anchors.fill: parent
+        hoverEnabled: true
+        onEntered: { fadeOut.running = false; fadeIn.running = true }
+        onExited: { fadeIn.running = false ; fadeOut.running = true }
+        onClicked: {
+            if (isForward)
+                fade.parent.goToNextSlide()
+            else
+                fade.parent.goToPreviousSlide()
+        }
+    }
+}

etc/calamares/qml/calamares/slideshow/Presentation.qml

@@ -0,0 +1,243 @@
+/* === This file is part of Calamares - <https://calamares.io> ===
+ *
+ *   SPDX-FileCopyrightText: 2017 Adriaan de Groot <groot@kde.org>
+ *   SPDX-FileCopyrightText: 2016 The Qt Company Ltd.
+ *   SPDX-License-Identifier: LGPL-2.1-only
+ *
+ *   2017, Adriaan de Groot <groot@kde.org>
+ *     - added looping, keys-instead-of-shortcut
+ *   2018, Adriaan de Groot <groot@kde.org>
+ *     - make looping a property, drop the 'c' fade-key
+ *     - drop navigation through entering a slide number
+ *       (this and the 'c' key make sense in a *presentation*
+ *       slideshow, not in a passive slideshow like Calamares)
+ *     - remove quit key
+ *   2019, Adriaan de Groot <groot@kde.org>
+ *     - Support "V2" loading
+ *     - Disable shortcuts until the content is visible in Calamares
+ *   2020, Adriaan de Groot <groot@kde.org>
+ *     - Updated to SPDX headers
+ */
+
+/****************************************************************************
+**
+** Copyright (C) 2016 The Qt Company Ltd.
+** Contact: https://www.qt.io/licensing/
+**
+** This file is part of the QML Presentation System.
+**
+** $QT_BEGIN_LICENSE:LGPL$
+** Commercial License Usage
+** Licensees holding valid commercial Qt licenses may use this file in
+** accordance with the commercial license agreement provided with the
+** Software or, alternatively, in accordance with the terms contained in
+** a written agreement between you and Digia.  For licensing terms and
+** conditions see http://qt.digia.com/licensing.  For further information
+** use the contact form at http://qt.digia.com/contact-us.
+**
+** GNU Lesser General Public License Usage
+** Alternatively, this file may be used under the terms of the GNU Lesser
+** General Public License version 2.1 as published by the Free Software
+** Foundation and appearing in the file LICENSE.LGPL included in the
+** packaging of this file.  Please review the following information to
+** ensure the GNU Lesser General Public License version 2.1 requirements
+** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+**
+** In addition, as a special exception, Digia gives you certain additional
+** rights.  These rights are described in the Digia Qt LGPL Exception
+** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
+**
+** GNU General Public License Usage
+** Alternatively, this file may be used under the terms of the GNU
+** General Public License version 3.0 as published by the Free Software
+** Foundation and appearing in the file LICENSE.GPL included in the
+** packaging of this file.  Please review the following information to
+** ensure the GNU General Public License version 3.0 requirements will be
+** met: http://www.gnu.org/copyleft/gpl.html.
+**
+**
+** $QT_END_LICENSE$
+**
+****************************************************************************/
+
+
+import QtQuick 2.5
+import QtQuick.Window 2.0
+
+Item {
+    id: root
+
+    property variant slides: []
+    property int currentSlide: 0
+
+    property bool loopSlides: true
+
+    property bool showNotes: false;
+    property bool allowDelay: true;
+    property alias mouseNavigation: mouseArea.enabled
+    property bool arrowNavigation: true
+    property bool keyShortcutsEnabled: true
+
+    property color titleColor: textColor;
+    property color textColor: "black"
+    property string fontFamily: "Helvetica"
+    property string codeFontFamily: "Courier New"
+
+    // This is set by the C++ part of Calamares when the slideshow
+    // becomes visible. You can connect it to a timer, or whatever
+    // else needs to start only when the slideshow becomes visible.
+    //
+    // It is used in this example also to keep the keyboard shortcuts
+    // enabled only while the slideshow is active.
+    property bool activatedInCalamares: false
+
+    // Private API
+    property int _lastShownSlide: 0
+
+    Component.onCompleted: {
+        var slideCount = 0;
+        var slides = [];
+        for (var i=0; i<root.children.length; ++i) {
+            var r = root.children[i];
+            if (r.isSlide) {
+                slides.push(r);
+            }
+        }
+
+        root.slides = slides;
+
+        // Make first slide visible...
+        if (root.slides.length > 0)
+            root.slides[root.currentSlide].visible = true;
+    }
+
+    function switchSlides(from, to, forward) {
+        from.visible = false
+        to.visible = true
+        return true
+    }
+
+    onCurrentSlideChanged: {
+        switchSlides(root.slides[_lastShownSlide], root.slides[currentSlide], currentSlide > _lastShownSlide)
+        _lastShownSlide = currentSlide
+        // Always keep focus on the slideshow
+        root.focus = true
+    }
+
+    function goToNextSlide() {
+        if (root.slides[currentSlide].delayPoints) {
+            if (root.slides[currentSlide]._advance())
+                return;
+        }
+        if (currentSlide + 1 < root.slides.length)
+            ++currentSlide;
+        else if (loopSlides)
+            currentSlide = 0;  // Loop at the end
+    }
+
+    function goToPreviousSlide() {
+        if (currentSlide - 1 >= 0)
+            --currentSlide;
+        else if (loopSlides)
+            currentSlide = root.slides.length - 1
+    }
+
+    focus: true  // Keep focus
+
+    // Navigation through key events, too
+    Keys.onSpacePressed: goToNextSlide()
+    Keys.onRightPressed: goToNextSlide()
+    Keys.onLeftPressed: goToPreviousSlide()
+
+    // navigate with arrow keys
+    Shortcut { sequence: StandardKey.MoveToNextLine; enabled: root.activatedInCalamares && root .arrowNavigation; onActivated: goToNextSlide() }
+    Shortcut { sequence: StandardKey.MoveToPreviousLine; enabled: root.activatedInCalamares && root.arrowNavigation; onActivated: goToPreviousSlide() }
+    Shortcut { sequence: StandardKey.MoveToNextChar; enabled: root.activatedInCalamares && root.arrowNavigation; onActivated: goToNextSlide() }
+    Shortcut { sequence: StandardKey.MoveToPreviousChar; enabled: root.activatedInCalamares && root.arrowNavigation; onActivated: goToPreviousSlide() }
+
+    // presentation-specific single-key shortcuts (which interfere with normal typing)
+    Shortcut { sequence: " "; enabled: root.activatedInCalamares && root.keyShortcutsEnabled; onActivated: goToNextSlide() }
+
+    // standard shortcuts
+    Shortcut { sequence: StandardKey.MoveToNextPage; enabled: root.activatedInCalamares; onActivated: goToNextSlide() }
+    Shortcut { sequence: StandardKey.MoveToPreviousPage; enabled: root.activatedInCalamares; onActivated: goToPreviousSlide() }
+
+    MouseArea {
+        id: mouseArea
+        anchors.fill: parent
+        acceptedButtons: Qt.LeftButton | Qt.RightButton
+        onClicked: {
+            if (mouse.button == Qt.RightButton)
+                goToPreviousSlide()
+            else
+                goToNextSlide()
+        }
+        onPressAndHold: goToPreviousSlide(); //A back mechanism for touch only devices
+    }
+
+    Window {
+        id: notesWindow;
+        width: 400
+        height: 300
+
+        title: "QML Presentation: Notes"
+        visible: root.showNotes
+
+        Flickable {
+            anchors.fill: parent
+            contentWidth: parent.width
+            contentHeight: textContainer.height
+
+            Item {
+                id: textContainer
+                width: parent.width
+                height: notesText.height + 2 * notesText.padding
+
+                Text {
+                    id: notesText
+
+                    property real padding: 16;
+
+                    x: padding
+                    y: padding
+                    width: parent.width - 2 * padding
+
+
+                    font.pixelSize: 16
+                    wrapMode: Text.WordWrap
+
+                    property string notes: root.slides[root.currentSlide].notes;
+
+                    onNotesChanged: {
+                        var result = "";
+
+                        var lines = notes.split("\n");
+                        var beginNewLine = false
+                        for (var i=0; i<lines.length; ++i) {
+                            var line = lines[i].trim();
+                            if (line.length == 0) {
+                                beginNewLine = true;
+                            } else {
+                                if (beginNewLine && result.length) {
+                                    result += "\n\n"
+                                    beginNewLine = false
+                                }
+                                if (result.length > 0)
+                                    result += " ";
+                                result += line;
+                            }
+                        }
+
+                        if (result.length == 0) {
+                            font.italic = true;
+                            text = "no notes.."
+                        } else {
+                            font.italic = false;
+                            text = result;
+                        }
+                    }
+                }
+            }
+        }
+    }
+}

etc/calamares/qml/calamares/slideshow/Slide.qml

@@ -0,0 +1,206 @@
+/* === This file is part of Calamares - <https://calamares.io> ===
+ *
+ *   SPDX-FileCopyrightText: 2012 Digia Plc and/or its subsidiary(-ies).
+ *   SPDX-License-Identifier: LGPL-2.1-only
+ */
+
+/****************************************************************************
+**
+** Copyright (C) 2012 Digia Plc and/or its subsidiary(-ies).
+** Contact: http://www.qt-project.org/legal
+**
+** This file is part of the QML Presentation System.
+**
+** $QT_BEGIN_LICENSE:LGPL$
+** Commercial License Usage
+** Licensees holding valid commercial Qt licenses may use this file in
+** accordance with the commercial license agreement provided with the
+** Software or, alternatively, in accordance with the terms contained in
+** a written agreement between you and Digia.  For licensing terms and
+** conditions see http://qt.digia.com/licensing.  For further information
+** use the contact form at http://qt.digia.com/contact-us.
+**
+** GNU Lesser General Public License Usage
+** Alternatively, this file may be used under the terms of the GNU Lesser
+** General Public License version 2.1 as published by the Free Software
+** Foundation and appearing in the file LICENSE.LGPL included in the
+** packaging of this file.  Please review the following information to
+** ensure the GNU Lesser General Public License version 2.1 requirements
+** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+**
+** In addition, as a special exception, Digia gives you certain additional
+** rights.  These rights are described in the Digia Qt LGPL Exception
+** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
+**
+** GNU General Public License Usage
+** Alternatively, this file may be used under the terms of the GNU
+** General Public License version 3.0 as published by the Free Software
+** Foundation and appearing in the file LICENSE.GPL included in the
+** packaging of this file.  Please review the following information to
+** ensure the GNU General Public License version 3.0 requirements will be
+** met: http://www.gnu.org/copyleft/gpl.html.
+**
+**
+** $QT_END_LICENSE$
+**
+****************************************************************************/
+
+
+import QtQuick 2.5
+
+Item {
+    /*
+      Slides can only be instantiated as a direct child of a Presentation {} as they rely on
+      several properties there.
+     */
+
+    id: slide
+
+    property bool isSlide: true;
+
+    property bool delayPoints: false;
+    property int _pointCounter: 0;
+    function _advance() {
+        if (!parent.allowDelay)
+            return false;
+
+        _pointCounter = _pointCounter + 1;
+        if (_pointCounter < content.length)
+            return true;
+        _pointCounter = 0;
+        return false;
+    }
+
+    property string title;
+    property variant content: []
+    property string centeredText
+    property string writeInText;
+    property string notes;
+
+    property real fontSize: parent.height * 0.05
+    property real fontScale: 1
+
+    property real baseFontSize: fontSize * fontScale
+    property real titleFontSize: fontSize * 1.2 * fontScale
+    property real bulletSpacing: 1
+
+    property real contentWidth: width
+
+    // Define the slide to be the "content area"
+    x: parent.width * 0.05
+    y: parent.height * 0.2
+    width: parent.width * 0.9
+    height: parent.height * 0.7
+
+    property real masterWidth: parent.width
+    property real masterHeight: parent.height
+
+    property color titleColor: parent.titleColor;
+    property color textColor: parent.textColor;
+    property string fontFamily: parent.fontFamily;
+    property int textFormat: Text.PlainText
+
+    visible: false
+
+    Text {
+        id: titleText
+        font.pixelSize: titleFontSize
+        text: title;
+        anchors.horizontalCenter: parent.horizontalCenter
+        anchors.bottom: parent.top
+        anchors.bottomMargin: parent.fontSize * 1.5
+        font.bold: true;
+        font.family: slide.fontFamily
+        color: slide.titleColor
+        horizontalAlignment: Text.Center
+        z: 1
+    }
+
+    Text {
+        id: centeredId
+        width: parent.width
+        anchors.centerIn: parent
+        anchors.verticalCenterOffset: - parent.y / 3
+        text: centeredText
+        horizontalAlignment: Text.Center
+        font.pixelSize: baseFontSize
+        font.family: slide.fontFamily
+        color: slide.textColor
+        wrapMode: Text.Wrap
+    }
+
+    Text {
+        id: writeInTextId
+        property int length;
+        font.family: slide.fontFamily
+        font.pixelSize: baseFontSize
+        color: slide.textColor
+
+        anchors.fill: parent;
+        wrapMode: Text.Wrap
+
+        text: slide.writeInText.substring(0, length);
+
+        NumberAnimation on length {
+            from: 0;
+            to: slide.writeInText.length;
+            duration: slide.writeInText.length * 30;
+            running: slide.visible && parent.visible && slide.writeInText.length > 0
+        }
+
+        visible: slide.writeInText != undefined;
+    }
+
+
+    Column {
+        id: contentId
+        anchors.fill: parent
+
+        Repeater {
+            model: content.length
+
+            Row {
+                id: row
+
+                function decideIndentLevel(s) { return s.charAt(0) == " " ? 1 + decideIndentLevel(s.substring(1)) : 0 }
+                property int indentLevel: decideIndentLevel(content[index])
+                property int nextIndentLevel: index < content.length - 1 ? decideIndentLevel(content[index+1]) : 0
+                property real indentFactor: (10 - row.indentLevel * 2) / 10;
+
+                height: text.height + (nextIndentLevel == 0 ? 1 : 0.3) * slide.baseFontSize * slide.bulletSpacing
+                x: slide.baseFontSize * indentLevel
+                visible: (!slide.parent.allowDelay || !delayPoints) || index <= _pointCounter
+
+                Rectangle {
+                    id: dot
+                    anchors.baseline: text.baseline
+                    anchors.baselineOffset: -text.font.pixelSize / 2
+                    width: text.font.pixelSize / 3
+                    height: text.font.pixelSize / 3
+                    color: slide.textColor
+                    radius: width / 2
+                    opacity: text.text.length == 0 ? 0 : 1
+                }
+
+                Item {
+                    id: space
+                    width: dot.width * 1.5
+                    height: 1
+                }
+
+                Text {
+                    id: text
+                    width: slide.contentWidth - parent.x - dot.width - space.width
+                    font.pixelSize: baseFontSize * row.indentFactor
+                    text: content[index]
+                    textFormat: slide.textFormat
+                    wrapMode: Text.WordWrap
+                    color: slide.textColor
+                    horizontalAlignment: Text.AlignLeft
+                    font.family: slide.fontFamily
+                }
+            }
+        }
+    }
+
+}

etc/calamares/qml/calamares/slideshow/SlideCounter.qml

@@ -0,0 +1,29 @@
+/* === This file is part of Calamares - <https://calamares.io> ===
+ *
+ *   SPDX-FileCopyrightText: 2018 Adriaan de Groot <groot@kde.org>
+ *   SPDX-License-Identifier: GPL-3.0-or-later
+ *
+ *   Calamares is Free Software: see the License-Identifier above.
+ *
+ */
+
+/* This control just shows a (non-translated) count of the slides
+ * in the slideshow in the format "n / total".
+ */
+
+import QtQuick 2.5;
+
+Rectangle {
+    id: slideCounter
+    anchors.right: parent.right
+    anchors.bottom: parent.bottom
+    width: 100
+    height: 50
+
+    Text {
+        id: slideCounterText
+        anchors.centerIn: parent
+        //: slide counter, %1 of %2 (numeric)
+        text: qsTr("%L1 / %L2").arg(parent.parent.currentSlide + 1).arg(parent.parent.slides.length)
+    }
+}

etc/calamares/qml/calamares/slideshow/qmldir

@@ -0,0 +1,10 @@
+module calamares.slideshow
+
+Presentation 1.0 Presentation.qml
+Slide 1.0 Slide.qml
+
+NavButton 1.0 NavButton.qml
+ForwardButton 1.0 ForwardButton.qml
+BackButton 1.0 BackButton.qml
+
+SlideCounter 1.0 SlideCounter.qml

etc/calamares/qml/calamares/slideshow/qmldir.license

@@ -0,0 +1,2 @@
+SPDX-FileCopyrightText: no
+SPDX-License-Identifier: CC0-1.0

etc/calamares/settings.conf

@@ -0,0 +1,69 @@
+# 4rch custom settings
+# SPDX-FileCopyrightText: no
+# SPDX-License-Identifier: CC0-1.0
+#
+# Configuration file for Calamares
+#
+---
+
+modules-search: [ local ]
+
+instances:
+- id:       mvezmkinit
+  module:   shellprocess
+  config:   shellprocess-mvezmkinit.conf
+- id:       ezfinish
+  module:   shellprocess
+  config:   shellprocess-ezfinish.conf
+
+sequence:
+- show:
+  - welcome
+  - locale
+  - keyboard
+  - partition
+  - users
+  - summary
+- exec:
+  - partition
+  - mount
+  - unpackfs
+  - machineid
+  - fstab
+  - locale
+  - keyboard
+  - localecfg
+  - luksbootkeyfile
+  - luksopenswaphookcfg
+  - removeuser
+  - users
+  - networkcfg
+  - hwclock
+  - services-systemd
+  - packages
+  - displaymanager
+  - shellprocess@mvezmkinit
+  - initcpiocfg
+  - initcpio
+  - grubcfg
+  - bootloader
+  - shellprocess@ezfinish
+  - umount
+- show:
+  - finished
+
+branding: ezarcher
+
+prompt-install: true
+
+dont-chroot: false
+
+oem-setup: false
+
+disable-cancel: false
+
+disable-cancel-during-exec: false
+
+hide-back-and-next-during-exec: false
+
+quit-at-end: false